|
 WENDON "standard" slip ring components become "custom"
assemblies to meet your exact needs...in less time...at less
cost.
Strictly speaking, there is no such
thing as a "standard" slip ring assembly because virtually every
requirement is unique. But from over 20 years of experience, WENDON
has developed a range of standard slip ring components that can be
combined and assembled in almost limitless ways to meet your
applications. Because they are assembled from standard components we
call them "Standard Slip Ring Assemblies", and they obviously save
you time and cost—plus assuring you of consistent quality and proven
performance.
| FEATURES |
|
For
Shaft Diameters: .750, 1.750, 2.750, 4.000, 5.250,
6.500
Fabricated Construction: (1) Highest resistance
to environmental conditions, vibration and shock requirements.
(2) Allows change in quantity of circuits per slip ring
and brush block assembly.
Flat type
ring design provides maximum number of rings in shortest
length for rated current and voltage.
Slip ring
assemblies can be installed onto a single shaft to produce a
unit having hundreds of rings. |
| MATERIALS |
|
Slip
RIng: Silver, surface finish less than 20
micro-inches
Brush
Contact: Siver Graphite
Brush
Leaf: Berylium copper, heat treated, and silver
plated.
Insulation: Glass base epoxy.
Mounting: Slip ring collar and brush block
brackets aluminum alloy (iridited). |
| GENERAL SPECIFICATIONS
|
|
Operating Temperatures : -60¼ F to
+200¼F
High
Potential Test: 1500 Volts RMS for one minute.
Insulation Resistance: 100 megohms minimum at
500 VDC, 60% R.H.
Brush
Life : 600 hours at 1000 FPM, 3000 hours at 250
FPM
Brush
Contact Noise: 500 microvolts at a current of 50
milliamperes. (2 contacts per ring) 250 microvolts at a
current of 50 milliamperes. (4 contacts per ring) |
Slip
RIng & Brush Block Assemblies | Standard Bore Sizes:
.750"
| 1.750"
| 2.750
| 4.00"
| 5.250"
| and 6.500"
| Home
Modified bore sizes can be provided
with
each standard
diameter. |
