|
|
Illustrated is a
custom design slip ring assembly used for strain gage
instrumentation; 60 circuit provides a low brush contact noise
of 100 microvolts @ 50 milliamps.
Back
to top |
|
|
Slip Ring
Assemblies Illustrated are a standard design for winder and
rewind converting systems. The features that are offered
include the following:
-
Overall length of 19"
- Shaft
or adapter mounted to meet with your shaft size.
- Rotating terminal board, minimizes installation
time.
- Power
control and low level signals within same enclosure, up to
50 circuits.
- Use of
ball bearings, not composite material.
- Vector
drives (AC) circuits isolated within enclosure. ELiminated
harmonic interference to encoder signals.
- Low
capacitance circuits provide an excellent square wave
signal.
Back
to top |
|
|
Unit illustrated
also used for winder/unwind applications with an additional
feature that includes the mounting of a resolver or encoder
directly in line with slip ring drive, less the use of a
sprocket and drive belt, zero backlash.
Back
to top |
|
|
Units illustrated
are compact in size, containing (4) or (6) circuits rated @ 20
Amps. Present applications are for heater and thermocouple
circuits used on conveyor lines in the baking industry. (Bore
sizes .750" to 1.000" dia.)
Back
to top |
|
|
Unit illustrated
contains 508 circuits within an overall length of 42".
Circuits include low power, control and low noise rings for
instrumentation.
Back
to top |
Wendon Company, Inc.
can provide as illustrated in photos, a complete array of custom
built slip ring assemblies to meet the majority of industry
requirements.
Call us directly to
discuss your requirements, immediate response
and "no voice
mail."
Home
| Standard
Slip RIngs | Mini-Tools
| Contact
Us
